E-11
3. Slide the FUNCTION SELECTOR to “RADIO” and the BAND SELECTOR to AM, FM or FM ST as
desired.
4. Tune to your desired station, and adjust the volume level that you wish to hear when the wake up time is
reached then press the POWER BUTTON again to turn off the System. Reconfirm the wake up time
setting by tapping the AL SET BUTTON.
5. At the selected wake up time the radio will turn 'On' and remain ‘On’ until it is turned off.
6. If you do not want the alarm to turn the radio on the following day, press the AL.ON/OFF Button again to
turn off the alarm function. The ALARM INDICATOR, , goes off.
WAKE TO CD
1. Press the POWER BUTTON to turn on the System. The LCD DISPLAY lights up.
2. Press the AL.ON/OFF Button once to turn on the alarm function. The ALARM INDICATOR will light up.
3. Slide the FUNCTION SELECTOR to “CD” to start playback.
4. Adjust the volume level that you wish to hear when the wake up time is reached then press the POWER
BUTTON again to turn off the System.
5. At the selected wake up time the radio will turn 'On' and remain ‘On’ until it is turned off.
6. If you do not want the alarm to turn the System on the following day, press the AL.ON/OFF Button again
to turn off the alarm function. The ALARM INDICATOR, , goes off.
WAKE TO ALARM
1. Set the FUNCTION SELECTOR to the “ALARM” position.
2. At the selected wake up time the
alarm
will sound for 3 minutes and turn off automatically.
3. If you do not want the alarm to turn on the following day, press the AL.ON/OFF Button again to turn off
the alarm function. The ALARM INDICATOR, , will go off.
CARE AND MAINTENANCE
1.
Clean your unit with a damp (never wet) cloth. Solvent or detergent should never be used.
2.
Avoid leaving your unit in direct sunlight or in hot, humid or dusty places.
3.
Keep your unit away from heating appliances and sources of electrical noise such as fluorescent lamps
or motors.
4.
If drop-outs or interruptions occur in the music during CD play, or if the CD
fails to play at all, its bottom surface may require cleaning. Before playing,
wipe the disc from the center outwards with a good soft cleaning cloth.
TROUBLESHOOTING GUIDE
If you experience difficulties in the use of this music system please check the following or call
1 800 777 5331
for Customer Service and Support.
Symptom
Possible Cause
Solution
Noise or sound distorted
on AM or FM broadcast
- Station not tuned properly for AM or
FM.
- FM: FM Wire antenna is not
extended.
- AM: The bar antenna is not positioned
correctly
- Retune the AM or FM broadcast
station.
- FM: Extend the FM Wire antenna.
- AM: Reposition the unit until the best
reception is obtained.
AM or FM no sound
- Unit not in “RADIO” function mode.
- Volume set at minimum
- Slide FUNCTION SELECTOR to
“RADIO” position.
- Increase Volume.
CD player will not play
- Unit not in CD function mode.
- CD is not loaded properly.
- If the CD is self-compiled, the media
used may not be compatible with the
player.
- Select CD function mode.
- Load CD with label side up.
- Use better quality blank media and
retest.
