background image

10

Using as DVD Player Only
Connecting to a Decoder with Dolby Digital Processing 
(Fig. F)
1.

The TV set (not supplied)

2.

The DVD player

3.

5.1 Dolby Digital receiver or decoder (not
supplied)

4.

The Audio/Video cord
Note : Leave the red and white plugs
disconnected.

5.

to video input connector (yellow)

6.

digital coaxial cable (not supplied)

7.

to digital sound input (bit stream/PCM)
connector

REMINDER!
Always set your TV to “VIDEO”,
“S-VIDEO” or “S-VHS’ in order to
receive video signal from DVD player.

Concerning the digital audio output
Depending on the disc format either Dolby Digital Sound or Linear PCM, sound will be sup-
plied from the unit’s digital audio output connector (PCM/Dolby digital) as shown in the follow-
ing table.

DISC

SOUND RECORDING

DIGITAL AUDIO OUTPUT

FORMAT

FROM CONNECTOR

DVD

Dolby Digital

Dolby Digital bit stream

Linear PCM

Linear PCM
(96kHz sampling only)

Audio

Linear PCM

Linear PCM

 CD

(44.1kHz sampling only)

NOTE:

The digital output provides signal when playing DVDs with 96kHz sampling.

For your reference

Dolby Digital is a digital sound compression technique developed by the Dolby Laborato-
ries Licensing Corporation.  Supporting 5.1-channel surround sound, as well as stereo
(2-channel) sound, this technique enables a large quantity of sound data to be efficiently
recorded on a disc.

Linear PCM is a signal recording format used in audio CDs.  While audio CDs are re-
corded in 44.1kHz/16bit, DVDs are recorded in 48kHz/16bit up to 96kHz/24bit.

If you have a Dolby Pro Logic Surround decoder, you will obtain the full channel Dolby
Digital soundtracks, as well as from titles with the Dolby Surround mark.

1

AUDIO OUT

VIDEO OUT

VIDEO

4

5

2

3

7

6

Fig. F

Summary of Contents for MCD-30


























Reviews: