Identification of Controls
Remote control unit
16.MUTE
Mute the sound
17.AUDIO
Press AUDIO repeatedly during playback to hear a different audio language
or audio track, if avilable.
18.MODE
Channel list
19.STOP
20.PLAY/PAUSE
21.RETURN
22.TTX
23.EPG
(
Electronic program guide)
Show EPG information
24.
BUTTON
Previous option.
25.
BUTTON
Next option.
26. BUTTON
Fast forward
27.
BUTTON
Fast backward
28. RED/GREEN
/YELLOW/BLUE
Some specific function
ENG-3
First Time Installation
After all connections have been made properly, switch on TV and
make sure the receiver is connected to the Main Power. Press Power
button to switch receiver on. If you are using the receiver for the first
time or restored to Factory Default, the Main Menu will appear on your
TV screen.
(
1) Select [OSD Language] and press RIGHT/LEFT key to select an
language.
(2) Select [Country] and press RIGHT/LEFT key to select your
country of residence.
(3) Select [Channel Search] and press RIGHT or OK key to begin
Automatic channel search.
(4) Once channel tuning is complete, you are now ready to watch TV.
Note:
1. If the device just show DENVER logo and cannot enter
system, the battery may too low and you need to connect
the charger and then turn on the device.
The device will turn to standby mode if no operation over
10minutes. You can press power button to activate the
device.
2. The TV are able to record programs onto an USB stick
,
but it cannot record subtitles.
When you start recording
,
a timebar will be shown in the
display. Push rec button once more to make the timebar
disappear.
