- 04 -
Getting started/Charging battery
1. Getting started
The radio is powered by the built-in lithium battery. A USB cable is supplied in the
product package.
Press and hold the
[
]
button to power on.
To power off the radio, press and hold the same button.
The Standby mode is enabled only when the power is connected and so to make use
of the Alarm clock function.
Connect the power supply to the radio, press and hold the
[
]
button to turn it on.
Pressing the
[
]
button again will turn the radio into standby.
2. Charging battery
You can check the level of battery power remains on the radio.
There is a battery power indicator
showing on the top row of the screen.
When battery power is low, the battery indicator keeps blinking as a reminder for
battery charging.
To charge the battery, connect the USB-C plug to the port where located at the rear
side of the radio, connect the other end to a power source supplied in 5V OUT (the
rating of the electric current is minimum 1A or higher), The LED on the rear side of
the radio will light up in red indicates the battery is charging. The charging icon
will appear on the screen.
When charging is done, the LED on the rear side will turn to green and the icon on
screen will change to
. it means the radio has the power connected.
Note: The charging might take much longer to complete if the radio is playing
while charging.