Denver IR-110, Quick Start Manual

Page: 2 / 44

ENGLISH
GETTING STARTED
Powering ON/OFF
1. When you first connect the unit to the mains socket, the unit will be in STANDBY
mode after showing “ Welcome to Internet Radio STARTING…. ” (F.1)(F.2)
2. Press the Standby button on the unit or remote control to switch the unit on.
3. Press the Standby button on the unit or remote control to switch the unit back
to standby on mode.
Selecting Modes
Press the MODE button repeatedly on the unit or remote control to switch between
Music player, DAB radio, FM radio, AUX In and Internet radio modes.
Welcome to
Internet Radio
STARTING
(F.1)
00/00/000
00 : 00
(F.2)
When the unit is idle for approximately 15 minutes, it will automatically switch to standby.
To switch the unit off completely, remove the mains plug from the main socket.
Please turn the unit off completely to save energy when not in use.
Network
1. During
System Settings
mode, press the
/
buttons to select
Network
and press the
SELECT
button to
confirm.
2. Press the
/
buttons to select from the following settings, and then press the
SELECT
button to confirm.
Network wizard SSID – select the desire wireless network.
Rescan – Scan for available networks.
Wired – select wired network.
Manual config – select wired/wireless network with DHCP enable/disable.
PBC Wlan setup Select PBC on the unit and press the PBC button on the modem device that you wish to
connect with. Press the SELECT button to continue.
View settings
Display the setting on the unit.
Wlan region Select a country of your choice.
Manual settings Select wired/wireless network with DHCP enable/disable.
NetRemote
PIN Setup To define a PIN number to be entered before being able to connect to the unit
remotely over a network
Network profile View the connected network.
Clear network
settings To delete the connected network memory in Network profile.
Keep network
connected
To define whether remains connected to its network in Standby mode and when not in
Network radio mode. This is necessary for remote operation and audio streaming in Music
Player mode.
3. Press the BACK button on the unit or on the remote control to cancel the setting and return back to the
previous menu.