E-4
E-3
LOCATION OF CONTROLS
1. SPEAKER
2. BLUE BACKLIT DISPLAY
3. BACK-UP BATTERY
COMPART MENT (BOTTOM OF UNIT)
4. CAVITY FOR DOCK A DAPTO R
5. DOCK A DAPTO R FOR iPOD
(SEVERAL DIFFERENT ADAPTOR S
ARE PROVIDED)
6. VOLUME DOWN ( ) KEY
7. VOLUME UP ( ) KEY
8. MEMORY KEY
9. EQ/ SLEEP KEY
10. ON/ OFF KEY
11. SKIP ( ) / SEARCH ( ) KEY
12. SKIP ( ) / SEARCH ( ) KEY
13. AL-SET/ AL-MODE KEY
14. FUNCTION/ CL-SET KEY
15. PLAY/ PAUSE / STEREO/ MONO KEY
16. SNOOZE DIMMER KEY
17. AUX INPUT SOCKET
18. HEADPHONES SOCKET
19. DC JACK (DC 7.5V )
20. FM ANTENNA WIRE
PREPARATION OF iPod DOCK
TO CONNECT AN iPod WITH A DOCK CONNECTOR TO THIS UNIT, FIRST INSERT THE DOCK
ADAPTOR THAT FITS YOUR iPod, AND THEN CONNECT YOUR iPod. YOUR HIFI INCLUDES
DOCK ADAPTORS THAT WORK WITH SEVERAL MODELS OF iPod WITH DOCK CONNECTORS.
IF YOU WANT TO CONNECT A DIFFERENT MODEL OF iPod AT A LATER TIME, YOU CAN EASILY
REMOVE THE DOCK ADAPTOR FROM YOUR SPEAKER SYSTEM USING A FINGERNAIL,
AND INSERT THE ADAPTOR THAT FITS THE NEW iPod. IF THERE IS NO DOCK ADAPTOR
FOR YOUR MODEL OF iPod INCLUDED WITH YOUR SPEAKER SYSTEM, AN ADAPTOR MAY
HAVE BEEN INCLUDED WITH YOUR iPod.
PLEASE CHECK INSIDE THE BOX OF THE iPod YOU PURCHASED FOR A PLASTIC DOCK
ADAPTOR.
AC OPERATION (EXTERNAL AC-DC POWER ADAPTOR)
- THIS SET IS EQUIPPED WITH A "DC-JACK" CAPABLE OF ACCEPTING
AC-ADAPTORS WITH A RATING OF DC = 7.5V, 1.5A, AND WITH A PLUG
WITH THE FOLLOWING POLARITIES AS SHOWN (CENTER POSITIVE) :
- PLEASE USE ONLY THE SUPPLIED AC-ADAPTOR TO OPERATE THE UNIT.
USE OF OTHER ADAPTORS MAY DAMAGE THE UNIT OR CAUSE IT TO MALFUNCTION.
- PLUG THE TAIL END OF THE AC-ADAPTOR INTO THE DC-JACK (SOCKET)
ON THE REAR OF THE UNIT.
- INSERT THE PLUG OF THE AC-ADAPTOR INTO A WALL OUTLET WITH AC-POWER.
- PRESS THE "ON/ OFF" KEY TO SWITCH ON THE UNIT.
- THIS UNIT IS DESIGNED TO OPERATE WITHOUT EVER BEING TOTALLY POWERED "OFF".
IT WILL EITHER BE "ON" OR IN "STANDBY MODE".
- IN STANDBY MODE, THE BLUE BACK-LIGHT OF THE DIGITAL DISPLAY WILL BE DIMMED
BUT THE DISPLAY WILL SHOW THE CURRENT TIME (CLOCK FUNCTION).
- ANYTIME DURING STANDBY MODE, YOU CAN SWITCH "ON" THE UNIT BY PRESSING
THE "ON/ OFF" KEY.
- SAVE ENERGY BY SWITCHING THE SYSTEM TO "STANDBY" MODE WHEN NOT IN USE.
POWER SUPPLY
- - -
FRONT VIEW:
BACK VIEW:
1
2
TOP VIEW:
3
6
7
8
4
5
9
10
11 12 13 14 15
16
17
18
19
20
- OPEN THE BATTERY DOOR AT THE BOTTOM OF UNIT.
- INSERT 2 PCS "AAA-CELL" (UM-4/LR03 TYPE) BATTERIES IN THE BATTERY
COMPARTMENT.
THESE 2 BATTERIES ARE FOR BACKUP OF THE "CLOCK" DURING BRIEF POWER
OUTAGES".
BACK UP BATTERIES
-
+
DIMMER FUNCTION
THIS SET HAS A DIMMER FUNCTION TO ADJUST THE BRIGHTNESS LEVEL
OF THE DISPLAY BACKLIGHT. SIMPLY ADJUST IT AS DESIRED BY PRESSING
THE SNOOZE/ DIMMER KEY REPEATEDLY (HI-DIMMER / LOW-DIMMER / OFF.)
TO REDUCE EYE STRAIN, AND TO SAVE ENERGY.
THE DISPLAY BACKLIGHT WILL ALWAYS RETURN IN HI-DIMMER AFTER RESET THE UNIT.
