--The unit has been dropped or physically damaged
z
SERVICING. Do not attempt to service the Digital Photo Frame beyond those means
described in these operating instructions. All other servicing should be referred to qualified service
personnel.
CAUTION—
To reduce the risk of personal injury or product/property damage:
z
CLEANING. Clean the outer surface of the Digital Photo Frame (excluding the screen)gently
using a soft cloth dampened with water. Clean the screen only with a specified cleaning solution for
use with products such as laptops and computer monitors. These are available at most retail
consumer electronics stores. Do not clean the inside of the unit
Condensation
If cold water is poured into a glass, water droplets form on the outside of the glass. This is called
condensation. Condensation may occur on internal operating parts of the product. Condensation
occurs:
z
When the product is brought from the outdoors into a warm room, or if it is in a cold room
which is heated quickly.
z
If the unit is moved occur, the product may not operate properly if condensation occurs. Wait1-
2 hours (to allow the internal parts to adjust to the surrounding temperature) before using the
product.
Frequently asked questions
Q:
How to set my Digital Photo Frame?
A:
The Digital photo Frame setup is very easy after following up the Users’ Manual Direction. just
plug the power adapter into the power jack( back side of the Digital Photo Frame) and plug the power
cord into a standard 100-240 volt AC electrical outlet. Next, insert a memory card into the card slot
and slide the power Switch to ON.
.
Q:
What kind of memory card does the Digital Photo Frame read?
A:
The Digital photo Frame can read all the popular memory cards including the large capacity of
32MB-4GB and above, which included MMC/SD/MS card.
Q:
What kind of media format does the Digital Photo Frame support?
A:
The Digital Photo Frame can support JPEG picture format
Q:
The adaptor of the Digital Photo Frame already be connected, why it is still no display?
A:
The Adapter doesn’t be connected to the Photo Frame or the Power Switch is not in the ON
SAVE
THESE
INSTRUCTIONS
FOR
FUTURE
REFERENCE