background image

MAINTENANCE

To clean the lens 

If the lens become dirty, the player will skip or 
not play, If this occurs, clean the lens in the 
following. manner, To remove dust or dust 
particles, first use a camera lens blower/brush 
1 to blow a few times to loosen particles, then 
gently brush the lens 2 clean finish by blowing 
the lens again.

Note 

Take care not to get too much solution on the 
swab. which could flow into the unit and cause 
damage. Pressing too strongly with the swab 
could scratch or break the lens.

To clean the discs 

Before playing, wipe the disc from the center 
out with a cleaning cloth, After playing, store 
the disc in its case.

CONNECTION TO AN EXTERNAL UNIT

NOTE

 
Use a commercially available connection cord 
which has a 3.5mm stereo plug at one and 
two phono plugs at the other end.
connect the stereo plug to the LINE OUT jack 
of the unit and connect the phono  plugs to the 
analog input (AUX) terminals of the external 
unit.

Turn off the power of both units before 
connection
DO NOT connect to the PHONES inputs of an 
amplifier (with a built-in phono equalizer 
amplifier)
Adjust the volume and BASS BOOST on this 
unit. 

K

I

J

K

8

J

1

2

LINE IN
CD IN
AUX

          

L

I

LINE OUT

Summary of Contents for DMP370













Reviews: