Denver DMP-391, Manual, Page: 4 / 7

IMPORTANT!
•
If there is no MP3/CD or CD inside the unit, “NoCd” will appear on the LCD display (1).
Loading an MP3/CD or CD
1. Gently press the OPEN button (7) to open the CD door (14).
2. Load the MP3/CD or CD into the CD player, label side up.
3. Gently close the CD door (14).
MP3/CD or CD playback
1. Connect your earphones to the earphones jack (8)
2. Press the PLAY/PAUSE button (4) to start the CD player and play the loaded MP3/CD or CD.
i. Anti-shock protection will be activated automatic ally and “ESP” will start flashing blink on
the display.
ii. “CD” will appear on the LCD display (1) when a CD is loaded.
iii. “MP3” will appear on the LCD display (1) when an MP3/CD is loaded.
3. Adjust the volume by pressing the button (5) and VOLUME- button (6) to your
preferred sound level.
4. Press the PLAY/PAUSE button (4) to pause playback anytime you want.
5. Press the PLAY/PAUSE button (4) again to resume playback.
Skip/Search when playing an MP3/CD or CD
1. Press the SKIP/SEARCH FORWARD button (10) once or several times to skip forward to the
desired track.
2. Press and hold the SKIP/SEARCH FORWARD button (10) to search forward in the current track.
3. Press the SKIP/SEARCH REVERSE button (11) once or several times to skip backward to the
desired track.
4. Press and hold the SKIP/SEARCH REVERSE button (11) to search backward in the current track.
Stopping an MP3/CD or CD
1. Press the STOP button (9) at any time to stop the MP3/CD or CD during playback.
2. Press the STOP button (9) again to switch off the CD player.
Playing MP3/CD or CD tracks in programmed sequence
1. Press the PROG button (13) “P01” and “PROG”, “P01”, “00” will appear on the LCD display (1).
2. Press the SKIP/SEARCH FORWARD button (10) or SKIP/SEARCH REVERSE button (11) to select
the track to be programmed.
3. Press the PROG button (13) to save the selected track to the program.
4. Repeat steps 2 and 3 to program up to 20 tracks (CD) or respectively 99 tracks (MP3/CD).
5. Press the PLAY/PAUSE button (4) to start playing the programmed tracks.
Other playback modes
1. Press the MODE button (12) once, “REP 1” will appear on the LCD display (1), and the CD
player will repeat playing the current track continuously.
2. Press the MODE button (12) once again, “REP ALL” will appear on the LCD display (1), and the
CD player will repeat playing the entire MP3/CD or CD continuously.
3. Press the MODE button (12) once again, “REP DIR” will appear on the LCD display (1), and the
CD player will repeat playing the current directory of the MP3/CD continuously.
(NOTE: This operation is applicable for MP3/CD only)