4. Plug the cigarette-lighter power plug into the cigarette lighter of your
car.
5. Install the external antenna as per the below diagram:
How to use:
1.
Turn on the #DAB-10 car adaptor.
2.
#DAB-10 will perform a Full Scan of DAB stations automatically.
3.
Press TX button on the #DAB-10 and the screen will show the current
FM transmitting frequency, make a note of that number. The default
is 87.5MHz but you can change to other manually so it suits better to
the area you are driving in.
4.
Turn on your in-car audio system.
5.
Switch the car radio’s FM frequency to match to #DAB-10 FM
transmitting frequency setting.
Long press "MENU/INFO" button, you will see few options:
-
Reset , to reset the DAB stations
-
Volume, to do the volume control
-
Full scan, to start the full scan DAB stations
-
Manual, to do the manual tuning of DAB stations
USING THE AUX INPUT
-
Connect the AUX connect wire (not included) from the out jack of
your Personal Player such as portable MP3 player to the AUX
input jack.
-
Turn on your Personal Player to begin playing, adjust the volume
to desire listening level.
-
USING THE AUX OUTPUT
-
Connect the AUX connect wire (not included) from the out jack of
the #DAB-10 car adaptor to the AUX input jack of your car.
-
The audio signal of the car DAB adaptor will be transferred to
your car speakers.
ENG 3 ENG 4