Setting Alarm Time
To preview the alarm time. Press the ALARM button (3/5) once.
While the display is showing the alarm time and you hold the ALARM
button for 3 seconds and the hours will blink. Press the Tune + (8) or
Tune - (4) to set the alarm hour.
Press the ALARM button again; the minute digits will blink. Press the
Tune + (8) or Tune – (4) to set the alarm minutes.
Press the ALARM button and you can change the sound mode (Buzzer,
Radio) for the alarm.
Press Tune + (8) or Tune – (4) to choose different volume. The alarm
volume will gradually increase. Then press the ALARM button when
done.
To delay the alarm, press SNOOZE. It will come on again in approx. 9
minutes. You may repeat this cycle several times during the alarm cycle.
To stop the alarm, press ALARM button .
To stop the alarm from coming on the following day, hold the ALARM
button to turn it off. The alarm icon will disappear to indicate the alarm is
disarmed.
Listening to Radio
Press the ON/OFF button (9) to turn the unit on.
Use the Tune + (8) or Tune – (4) button to select the desired FM station.
If you press and hold the Tune + (8) or Tune – (4) button for one second,
the release, the unit will automatically scan to the next broadcasting
station.
Press the ON/OFF button (9) to turn the radio OFF.
To set / recall the radio presets
Press the ON/OFF button (9) to turn the unit ON.
Use the Tune + (8) or Tune – (4) button to select the desired FM station.
Press the SET.MEM/ M + button (7); “P02” will blink in the display.
Press the SET.MEM / M + button (7) again to set the preset.
Repeat steps 2 through 4 to set more presets.
The unit can preset 10 stations totally for FM.
When “P01-P10” is blinking, press the Tune+ (8) or Tune- (4) button to
select the preset number.
When recalling preset stations, press SET.MEM / M + button (7) to select
the preset number.
ENG-3
