3. Press the BACKWARD or FORWARD button to set the minute time of the alarm and
then press the SELECT button.
4. Press the BACKWARD or FORWARD button to cycle through the duration options and
then press the SELECT button to confirm the selection.
The duration defines the time before the radio returns to standby mode if the alarm is
not deactivated.
Duration options: 15, 30, 45, 60, 90 and 120 minutes.
5. Press the BACKWARD or FORWARD button to cycle through the source options and
then press the SELECT button to confirm the selection.
The source defines the sound source of the alarm.
Source options: DAB, FM and Buzzer.
If DAB or FM is selected, you will also be prompted to select the last played station or
one of the preset stations (if set) as the alarm.
6. Press the BACKWARD or FORWARD button to cycle through the interval options and
then press the SELECT button to confirm the selection.
The interval defines on which days the alarm is active.
Interval options: Daily, Once, Weekends and Weekdays.
If “Once” is selected, you will also be prompted to set a specific date.
7. Press the BACKWARD or FORWARD button to adjust the volume level and then press
the SELECT button.
This setting defines the sound volume of the alarm.
8. Press the BACKWARD or FORWARD button to select alarm on or off and then press
the SELECT button to confirm the selection.
When the alarm setting is active, the corresponding alarm icon
(A1)
for alarm 1 and
(A2)
for alarm 2) will show on the display.
At the set time, the alarm will sound. The volume will increase gradually until it reaches
the set volume level. The corresponding alarm icon will also flash on the display.
