4. Press and release the
Preset
button to confirm your selection. The display will
Tuning to a preset DAB station
In DAB mode
confirm Preset X stored, where “X” is the number of the preset (1-20).
Note: If an existing DAB station is already stored as a preset, it will be
overwritten when storing the new station
.
Using your FM Radio
Alarm setting:
1.
P
ress and release the
Preset
button; the display shows Preset Recall s1 and
the name or frequency of the station stored, or “Empty” if no previous station
has been stored.
2. Press the
Prev.
or
Next
button to scroll to the Preset location and station you
would like to listen to (1-20).
Press the
Preset
button; the radio will instantly tune to that station and play it.
Note: If no DAB station has been stored with the
Preset
button, Preset Empty
will be displayed. The radio will revert to the previously selected radio station
in a few seconds.
1. Extend the telescopic antenna.
2. Press and hold the
Prev.
or
Next
button to scan up or down the frequency
range. When a station is found, the scan stops and the located station is played.
Press the Scan button to search FM stations.
3. You can fine-tune the frequency by pressing the Prev. or Next button to
advance 0.05 MHz with each press.
ENG-4
Press the Alarm button, press the Prev. or Next button to choose
Alarm 1 or Alarm 2 and confirm with the Preset button.
Adjust the hour and minutes with the Prev. or Next button and
confirm with the Preset button
.
Choose the alarm duration from 10 to 60 minutes and confirm with
the Preset button.
