ENG-5
ALARM FUNCTION
- THIS SET IS EQUIPPED WITH 2 ALARM MODES: BUZZER AND RADIO.
BEFORE SETTING THE ALARM, MAKE SURE TO SET THE CLOCK (SEE "DIGITAL
CLOCK FUNCTION" IN THE PREVIOUS SECTION) .
PREPARE FOR THE ALARM SETTINGS
A. "ALARM" TIME SETTING
1. PRESS THE ON/OFF KEY TO PUT THE SET INTO "STANDBY" MODE
2. PRESS AND HOLD AL. MODE KEY UNTIL THE DISPLAY WILL NOW SHOW:
3. PRESS BACK
AND NEXT
KEY TO REACH THE HOUR
OF THE DESIRED WAKE UP TIME THEN PRESS AL. MODE KEY TO
CONFIRM. THE DISPLAY WILL NOW SHOW:
4. PRESS BACK
AND NEXT
KEY TO REACH THE
MINUTES OF THE DESIRED WAKE UP TIME, THEN PRESS THE AL. MODE
KEY TO CONFIRM.
B. "ALARM" MODE SETTING
NOW SELECT THE SOURCE THAT YOU WISH THE UNIT TO PLAY AT THE "WAKE UP"
TIME AS BELOW:
FOR RADIO :
PRESS THE ON/ OFF KEY TO SWITCH ON THE SET (DISPLAY BACKLIGHT WILL
BE "ON").
TUNE IN THE DESIRED STATION.
ADJUST THE VOLUME LEVEL AS DESIRED BY PRESSING VOL. UP + OR VOL. DN -
KEY.
ONCE THE DESIRED SOURCE IS READY, PRESS THE ON/ OFF KEY TO PUT THE
SET INTO STANDBY MODE AND THEN SHORT PRESS THE AL. MODE KEY
REPEATEDLY TO SELECT THE SOURCE AS DESIRED.
*REMARK:
= BUZZER ALARM / FM = RADIO
1. THE ALARM TIME IS NOW FULLY PROGRAMMED AND THE ALARM SYMBOL WILL
APPEAR TO INDICATE THAT THE ALARM FUNCTION IS "ACTIVE".
(DISPLAY SHOWS AS FOLLOWS)