ENG- 2
For the power capacity in the battery, refer to the following icons:
Full
Middle
Low
1 .Connect device to car adaptor through Mini-USB port, device will power on automatically &
enter standby mode and start charging with red indicator light ON. Once device has been fully
charged, red indicator light goes out.
2. Connect device to PC via USB cable, device will power on automatically and start charging.
Once device has been fully charged, red indicator light goes out.
Installation and Removal of micro SD card
1.
In the direction as indicated, insert the micro SD card into the slot until it is held firmly.
2.
To take the micro SD card out, slightly press the micro SD card to eject it out.
[Note]:
1.
Observe the direction to insert the micro SD card; if the direction is wrong, the device and/or
the micro SD card may be damaged.
2.
When the micro SD card is inserted into the device, the machine will set the micro SD card as
preset storage.
3.
If the micro SD card is incompatible with the device, please insert the card again or replace it
for retry.
1.Shutter
2.Speaker
3.ON/OFF
4.USB port
5.Micro SD card slot
6.Lens
7.Charging indicator
light
8.Busy indicator light
9.Cover
10.Screen
11.Mode
12.Menu
13.AV port
14.Down (Zoom out)
15.Up (Zoom in)
16.Tripod slot
