POWER SOURCE
Insert the small plug from the supplied
AC/DC adapter to the DC in jack on
the unit. Insert the AC/DC adapter to
DC in jack on the unit.
BATTERIES INSTALLATION (REMOTE CONTROL)
To replace the button cell:
1. Push the tab, then slide out the battery tray as
the figure on the right.
2. Replace the old button cell by a new CR 2025
button cell as the polarity markings on the
remote control.
3. Close the battery tray.
BATTERY PRECAUTIONS:
Follow these the size and type of battery specified.
1. Use only the size and type of battery specified.
2. Be sure the follow the correct polarity when installing the battery as indicated in the
battery compartment. A reversed battery may cause damage to the device.
3. If the battery in the device is consumed or the device is not to be used for a long
period of time, remove the batteries to prevent damage or injury from possible battery
leakage.
4. Do not try to recharge the battery not intended to be recharged; it can overheat and rupture.
5. The batteries shall not be exposed to excessive heat such as sunshine, fire or the like.
6. Clean the battery contacts and also those of the device prior the battery installation.
7. Do not mix different types of batteries together (e.g. Alkaline and Carbon-zine) or old
batteries with fresh ones.
2
PUSH
OPEN
CR2025
PUSH
OPEN
Lithium Cell
CR2025
3V
SC UL
Lithium Cell
CR2025
3V
SC UL
LED INDICATORS
Line In Mode
USB Mode
Power Off
Green Light
Orange Light
Red Light
Status
Indicator
Status
Indicator
Blue Light
Flashing Blue Light
Bluetooth Ready
Bluetooth Connected