How to pair with phone
·Turn on your phone and ensure Bluetooth function is active.
·Turn on the Bluetooth earphones & go to the pairing mode
·Search after Bluetooth devices on your phone by following the phones’s instructions. Refer to your
phone’s user manual for more information.
·After a few seconds the phone will list the names of active Bluetooth units. Choose “BTE-100”.
·Your phone might ask for a password, if so, enter 0000(4 zero).
· Your phone will confirm the pairing, and you are then ready to use the earphones.
How to pair with computer
· If your PC does not have Bluetooth, you can use a Bluetooth USB adapter (not included)
·Turn on Bluetooth earphones & go to the pairing mode.
· Open the Bluetooth menu installed on your PC, and search after Bluetooth devices. (refer to user
manual of the PC for more information.)
·After a few seconds”BTE-100” will will show on the list of active Bluetooth units. Choose this and
choose “connect”.
·Your PC will now connect, and you are then ready to use the earphones.
2.3 charge your earphones.
The earphones are charged by MicroUSB, either connected to a USB port in a PC, or using an
external USB charger (not incl.) Full charge takes approximately 2.5 hour. When the earphones are
fully charged, the LED will turn off.
3.
Technical specification:
Parameter
specification
Bluetooth version
V4.1
Bluetooth profiles
Support A2DP1.2,AVRCP1.0,HFP1.5,HSP1.0A2DP1.2,AVRCP1.0,HFP1.5,HSP1.0
RF range
10m
Frequency
response
80Hz-20KHz
Loudspeaker
output
10mW
Signal-To-Noise
≥80dB