16
Familiarize yourself with the vehicle before you use it so that you can keep the Electric scooter in sound condition.
Observe all safety instructions when riding the Electric scooter.
The Electric scooter is designed only for personal entertainment. Avoid operating it on public roads/in road traffic.
Children, elderly people, and pregnant women are not allowed to ride the vehicle.
People with limited sense of balance are not allowed to ride the Electric scooter.
Avoid riding the Electric scooter under the influence of alcohol or other substances.
Do not carry any objects while riding.
Make sure you have a clear vision in front of you to ride the Electric scooter safely.
While riding, your feet must always be on the foot board.
The Electric scooter can accommodate only one person.
Do not start or stop abruptly.
Avoid riding on steep slopes.
Stop riding the Electric scooter if you hit against a solid object (such as a wall or other structure) with it.
Do not ride in dimly lit or dark places.
Ride the Electric scooter at your own risk, we assume no liability for accidents or damage.
Ride at a safe speed that allows you to stop at any time.
Keep the Electric scooter at a sufficient distance from other people and avoid collisions.
Steer through balance shifting, fast movement can result in falls.
Do not ride in rain or under other wet conditions. Ride only in dry weather.
Avoid riding over obstacles, if possible, and avoid snow, ice, and slippery surfaces.
Avoid riding over textiles, small branches, and stones, if possible.
Avoid riding in narrow places or in places with obstacles, if possible.
Jumping on and off the Electric scooter will cause damage that is not covered by the warranty. There is a risk of
injury. Injuries and damage due to "trick riding" are not covered by the warranty.
13.6
Charging
Make sure that the Electric scooter, charger, and DC power input of the device are always dry.
Note: To charge this Electric scooter, use SOLELY the supplied XHK-922-29415 charger with the following output:
29.4 V - 1.5 A.
Using a different charger may cause damage to the device and other potential risks.
Use the mains adapter to plug the DC input of the device into a conventional socket.
There will be no light on the charger before charging, when connected to e-scooter the adapter will light red, and
charging has started.
The red indicator lights up when properly charged; if this is not the case, please check the connections.
Now you can stop the charging cycle. Overcharge shortens the battery life.
The charging process takes up to 3 hours. Do not charge the battery for more than 3 hours. After 3 hours,
disconnect the charger from the device and the power supply. Overcharge reduces the battery service life.
The product must not be charged over extended periods.
Always keep an eye on the device throughout the charging cycle.
Charge the device only at temperatures between 0 °C and +45 °C.
When charging at lower or higher temperatures, there is a risk that the battery performance will be reduced;
therefore, there is a potential risk of injuries and material damage.
Store and charge the device in an open, dry area away from combustible materials.
Do not charge the device in direct sunlight or in the vicinity of open flames.
Do not charge the device immediately after use. Allow the device to cool down for an hour before charging it.
If the device is left to other people, it must be charged partially (20 - 50%), not fully.
Do not remove the device from its package to fully charge it and then put it back in the package.
The device is generally partially charged as shipped from the factory. Keep the device partially charged until it is
used.
Allow the Electric scooter to cool down for at least 1 hour before it can be put in the package.
Do not leave the device exposed to sunlight in a car.
CAUTION
The Electric scooter must not be used during the charging cycle!
The LED indicator on the battery charger lights red during the charging process.
The LED indicator on the charger will light green when the charging process is complete.
After charging, disconnect the charger from the mains and the Electric scooter.
CAUTION
Connect the DC cable supplied with the Electric scooter only to the DC input!
Do not insert foreign bodies into the DC input.
