Speed mode
This drone has 3 response modes: Low, Medium, High.
MODE 1(Low): Press the speed mode switch until you hear a single beep, suitable for
beginner.
MODE 2(Medium): Press the speed mode switch until you hear two beep, suitable for
practician.
MODE 3(High): Press the speed mode switch until you hear three beep, suitable for Skillful
player.
How to take video & photo
Step 1: Insert the Micro SD card
into the camera(see pic), make
sure the direction you selected is
correct.
Step 2: Turn on the Power
Switch of the Drone as you
would for any normal flight.
Step3: A blue light will show on
the camera whenever the Drone
is in use. A Red light will flash on
then off when you take a photo,
and A Red light will remain on
when taking a video.
When Aerial is over, please disconnect the drone and battery. Pull out the Micro SD, put the
Micro SD into the cardreader, then connect the USB to computer.
Drone camera parameters as below:
Video resolution: 640*480P/30fps; Camera resolution: 640*480
Resetting the drone
Push both control sticks to the positions shown in the picture, and hold them for a few
seconds. The lights on the drone will start to flash. Now the drone is recovered to its original
factory setting and ready to fly again.
Summary of Contents for DCH-261
Page 9: ......
