Denver Electronics 5706751032660, Manual

Page: 19 / 88

Instructions
Charging DENVER PBA-4001 (Figure 1/Figure 2 )
1. Use original USB data cable and connect microUSB to microUSB port on DENVER
PBA-4001;
2. Connect USB cable to USB port on DC5V USB charger or computer.
If LED signal fli ckers, it means DENVER PBA-4001 is being charged;
Please pull out power supply a ft er recharging fully.
Charging digital product with DENVER PBA-4001 (Figure 3)
1. Check if the charging voltage of the digital product is compa ti ble with the DC5V
output voltage of DENVER PBA-4001.
2. Use the digital product's original cable, and connect one end to the digital
product, the other end to DENVER PBA-4001. If ba tt ery signal (output signal)
lights up, it means the charging process starts. When all signals light up, it means
the digital product is fully charged.
Flashlight function
Press the switch twice to turn on the LED fl ashlight and press twice to turn it o ff .
LED power indicator:
LED Signal Ba tt ery Percentage
One signal lights up 0~25%
19
English / English