B EN XS00 DFU WEB / Rev.08 / 01-2018 (Old ZF 190270.EN)
29/48
Additional Directions For Use
7.4
Calibration
This function is to decrease fluctuation in the rotation speed of the motor
handpiece and the difference in torque by the contra angle.
Calibration is recommended when using a new/other contra-angle or
after an extended period of operation, as the running properties can
change with usage, cleaning and sterilization.
(1)
Lubricate the contra angle with an appropriate spray (see
8.1
Lubricating Contra Angle
).
(2)
Turn the power off if the power is on.
(3)
Connect the AC adapter and confirm that the AC IN lamp lights.
(4)
Turn on the power.
(5)
Hold down both buttons of the SPEED key simultaneously for more
than one second.
(6)
The LCD panel displays “
” with the alarm sound.
(7)
Attach the contra angle head to the motor handpiece and press the
MEMO key.
(8)
The motor handpiece begins to rotate : leave it as it is until it stops.
(9)
This process ends, if the rotation stops and the LCD panel display
returns to its original state.
(10)
If you want to stop this process, turn the power off.
NOTICE
• Lubricate the contra angle before Calibration.
• This function does not operate if AC adapter is not used.
• Do not touch or apply a load to the rotating shaft of the contra
angle head : it obstructs.
• This function cannot completely absorb the individual difference of
the actual motor handpiece and contra angle.
