Dentsply Sirona SiroCam AF, Instructions For Use Manual

Page: 31 / 36

Dentsply Sirona
Instructions for Use SiroCam UAF Plus 7 Electromagnetic compatibility
7.2 Interference immunity
66 90 643 D3762
D3762.201.01.03.02 04.2021
31
Ports of signal input/signal output units (SIP/SOP)
Phenomenon Basic EMC standard Interference immunity test level for profes-
sional healthcare facilities
Electrostatic discharge
e
IEC 61000-4-2 ± 8 kV contact
± 2 kV, ± 4 kV, ± 8 kV, ± 15 kV air
e
Connectors shall be tested per 8.3.2 and Table 4 of IEC
61000-4-2:2008. For insulated connector shells, perform air discharge
testing to the connector shell and the pins using the rounded tip finger
of the ESD generator, with the exception that the only connector pins
that are tested are those that can be contacted or touched, under
conditions of intended use, by the standard test finger shown in Figure 6
of the general standard, applied in a bent or straight position.
Test specifications for enclosure port immunity to RF wireless
communications equipment
Test fre-
quency (MHz) Frequency band
a
(MHz)
Radio service
a
Modulation
b
Power
max. (W) Distance
(m) Immunity test
level (V/m)
385 380 - 390 TETRA 400 Pulse modulation
b
18 Hz
1.8 0.3 27
450 430 - 470 GMRS 460,
FRS 460 FM
c
± 5 kHz stroke
1 kHz sinus
2 0.3 28
710
745
780 704 - 787 LTE band 13,
17 Pulse modulation
b
217 Hz
0.2 0.3 9
810
870
930 800 - 960 GSM
800/900,
TETRA 800,
iDEN 820,
CDMA 850,
LTE band 5 Pulse modulation
b
18 Hz
2 0.3 28
1720
1845
1970 1700 - 1990 GSM 1800;
CDMA 1900;
GSM 1900;
DECT;
LTE band 1,
3, 4, 25;
UMTS Pulse modulation
b
217 Hz
2 0.3 28
2450 2400 - 2570 Bluetooth,
WLAN,
802.11 b/g/n,
RFID 2450,
LTE band 7 Pulse modulation
b
217 Hz
2 0.3 28
5240
5500
5785 5100 - 5800 WLAN
802.11 a/n Pulse modulation
b
217 Hz
0.2 0.3 9
NOTE If necessary, the distance between the transmitting antenna and
the UNIT can be reduced to 1 m in order to achieve the immunity test
level. The 1 m test distance conforms to IEC 61000-4-3.