Safety and Compliance (continued)
100007081
Sirona Dental, Inc.
30-30 47th Avenue, Suite 500
Long Island City, New York 11101 USA
Sirona Dental Systems GmbH
Fabrikstr. 31
D-64625, Bensheim
Germany
Part Number 100007081 Rev. 2
Copyright © 2019
by Dentsply Sirona, Inc.
All Rights Reserved
(Publication date 8/8/2019)
Protect Sensor from Potential ESD Damage
Like other electronic devices, your Schick AE Sensor is susceptible to electrostatic discharge
(ESD), particularly when the device is used in or around carpeted areas or low-humidity
environments. During cable replacement, when Sensor contacts are exposed, it is especially
important to protect the device from potential ESD damage. Touching a metal surface prior to
replacing the cable will reduce the risk of damaging Sensor components by accidental static
discharge. Using anti-static floor mats will also help eliminate static build-up in your office.
Apply Recommended Procedures for Cleaning
To help ensure proper hygiene and to protect against infectious disease, refer to the User Guide
and observe all device cleaning and patient protection recommendations specified there.
Although water-resistant, the Sensor should never be soaked or submerged in disinfecting
solution during any cleaning procedure. Failure to comply with this precaution may cause liquid
to enter the Sensor and can prevent it from operating properly.
Always Use Sheaths with Schick Sensors
Use sheaths every time the Sensor is used. Never use a damaged sheath. Always dispose of
the sheath after every patient. Protective sheaths are single-use items and must not be reused
under any circumstance. Reuse of single-use items/instruments may cause them to become
contaminated, compromise their intended function, and result in patient and user infection, injury
and/or illness.
Product Manuals from Dentsply Sirona
The contents of document are subject to change without prior notice. For the latest version of
this guide and other information, please visit our website at www.dentsplysironasupport.com.
