Dentmate Ledex WL-090+, Instructions For Use Manual

Page: 11 / 54

Light intensity
Recommended Curing Time (on STANDARD mode)
Fill Materials Curing time
Universal composite (2 mm depth) 10 seconds
Universal composite (4 mm depth) 20 seconds
**Generally, these recommendations apply depends on situations. The emission
window of the light probe is placed directly over the material in order to be polymerized.
Extend the curing time accordingly to increase the distance between the light source
and the material.
Recommended curing modes
Mode Application
LOW Tooth and composite resin
RAMP Wide area of composite resin, avoid shrinkage.
STANDARD Most cases.
HIGH For orthodontic or pediatric dentistry,
FAST ORTHO Band materials
TURBO Dental cement, porcelain veneer, fiber post.
PLAQUE INSPECT Ideal for dental plaque inspect. The location of plaque
or tartar will be changed to red of fluorescence.
CARIES INSPECT
Ideal for caries inspect. The location of caries which has
caries bacteria will be changed to red of fluorescence.
If you see the dark spot, it also is caries.
8
EN