Better Health Starts Here
®
DentistRx InteliSonic
11
2. After completing the brushing cycle, you can
spend additional time brushing the chewing
surfaces of your teeth and areas where
staining occurs. You may also brush your
tongue, with the toothbrush turned on or off,
as per your personal preference or dentist
recommendation.
Note: The InteliSonic is also safe to use on:
•
Dental restorations (fillings, crowns, veneers)
•
Braces (brush heads will wear out sooner)
Additional Oral Care Needs
Periodontal pockets: Spend extra time working
the bristles into the pockets where plaque collects
below the gumline. Ask your dental professional for
help with identifying these areas.
sanitizing the Brush Head(s)
1. Place the brush head bristles under running
water and rinse after each use.
2. Gently shake the toothbrush to remove any
excess water after cleaning.
3. Lift and open the UV sanitizer lid.
4. Place the brush head(s) on
the peg(s) located in the UV
sanitizer drip tray with the
bristles directly facing the
UV light bulb. Remove the
travel cap before proceeding
with UV sanitizing. DO NOT
PLACE THE PROTECTIVE
TRAVEL CAP ON THE
BRUSH HEAD DURING UV
SANITIZING.
5. Make sure the charger base with UV sanitizer
is plugged into a working outlet.
6.
Close the UV sanitizer lid to activate the UV
sanitizing process.
a. The sanitizer lid will glow with a slight blue
hue indicating the UV light bulb is lit and
the sanitizing cycle has started. Please note
that this glow may be difficult to view in well
lit areas.
b. When the sanitizing cycle is complete, the
sanitizer will automatically turn off and
the lid will no longer glow.
7. When using the UV sanitizer:
a. Only clean InteliSonic heads in the
sanitizer.
b. Do not insert brush heads or operate the UV
sanitizer without the drip tray in place.
c. The UV sanitizer will only work when the
lid is closed.
d. The UV sanitizer will run for 7 minutes
and shut off automatically.
e. The UV sanitizer will run automatically
every time the lid is closed.
Operation Modes
1. There are 3 operation modes: normal,
sensitive and massage.
2. Use the triangular mode selection button to
select your preferred operation mode. Your
mode selection will be indicated by a green light.
a. Normal:
Completely cleans your teeth
and gums.
b. Sensitive: Gently cleans your tongue and
any other sensitive areas.
c. Massage: Pulsates for gentle gum
stimulation.
Note: The high-speed sonic toothbrush is different
from traditional rotary power toothbrushes. Some
people may experience a slight tickling sensation
from its high speed vibration. After a few uses of the
toothbrush, this sensation will diminish.
Maintenance
Cleaning the Power Plug
1.
Clean the power plug regularly to ensure
it remains in good working order. The
accumulation of dust or dirt on the power
plug can cause an electric shock or reduce
the insulation effect, causing the system to
overheat.
Cleaning the Brush Head(s)
1. Rinse the brush head and bristles after each use.
2. Do not use water with a temperature higher
than 100 degrees Fahrenheit.
Cleaning the Handle
1. Remove the brush head.
2. Wipe all surface areas with a damp cloth and
place the handle back into the charger or
handle base. Do not submerge the handle in water.
3. Do not clean in the dishwasher.
Cleaning the Charger Base
1. Remove the power plug from the electrical
outlet before cleaning the charger base and
UV sanitizer.
2. Using a soft cloth, wipe dirt or debris from
the charger base and UV sanitizer exterior
surfaces.
3. Clean the plug base with a dry cloth to
remove any dust or dirt every 3 months.
