Denso BHT-700QWB-CE, User Manual

Page: 4 / 182

iii
BHT-700QWB-CE/700QWBG-CE
About this Manual
•
Due to improvements and so on, the content of this manual may be subject to change without prior notice.
•
The reproduction or duplication of the whole or part of this manual is strictly prohibited without prior consent.
•
Every attempt has been made to ensure that the content of this manual is thorough and up to date, however, we
kindly ask that any questionable content, mistakes, or omissions be reported to DENSO WAVE.
•
The copyright for this User’s Manual belongs to DENSO WAVE INCORPORATED.
•
Lettering in the screens in this User’s Manual is a little different from that in the actual screens. File names used
are only for description purposes, and will therefore not display if files have not been set with the same names.
Manual Composition
This manual is made up of the following 9 chapters.
Chapter 1 Outline
Describes the BHT system and provides an overall outline of the BHT.
Chapter 2 BHT Preparation
Describes information required by the user and procedures that must be performed prior to
commencing operation.
Chapter 3 Basic Operation
Describes how to scan 2D codes and barcodes using the BHT, the backlight function, how to use the
keypad, and BHT data transmission.
Chapter 4 System Operation
Describes how to operate the desktop, Start menu and System Menu, and how to make wireless
network settings.
Chapter 5 Communication
Describes technical information on BHT connector communication, infrared communication, and
wireless communication, and provides details of Microsoft ActiveSync.
Chapter 6 Maintenance
Describes battery cartridge and memory back-up power source replacement, and daily procedures for
taking care of the BHT and CU/CH.
Chapter 7 Error Messages
Describes causes and countermeasures for error messages that display during BHT use.
Chapter 8 Specifications
Describes specifications for hardware, readable 2D codes/barcodes, and interfaces.
Chapter 9 Appendices
Describes the CU-700 Series (option) and provides details of the MicroSD card (option) insertion
procedure.