Denso BHT-700QWB-CE, User Manual

Page: 142 / 182

124
BHT-700QWB-CE/700QWBG-CE
5.6 ActiveSync
ActiveSync allows the BHT to connect to the host computer and perform the following operations.
•
Data synchronization
•
Data back-up
•
Data copy or transfer
•
User program debugging
Any of the following four methods can be used to connect the BHT and host computer.
•
IrDA communication
•
Connector communication (USB)
•
Wireless communication
•
CU-714 communication
5.6.1 ActiveSync 4.5 Installation
A host computer with IrDA interface port or USB interface port is required to install ActiveSync 4.5.
−
Point
− Connection with ActiveSync is not possible when using the CU-733 with RS-232C
interface.
It is necessary to perform communication with the BHT and host computer IrDA interface
ports facing one another.
With ActiveSync 4.X, ActiveSync by wireless communication or CU-714 communication is
not possible. Use ActiveSync 3.8 or earlier version.
When establishing a connection between the BHT and host computer using ActiveSync, install
ActiveSync 4.5 on the host computer.
ActiveSync 4.5 can be downloaded free of charge from the following Microsoft Web site.