Chapter 2 Getting Started the BHT and System Mode
Setting the communications protocol type
On the SET COMMUNICATION menu, select "4: PROTOCOL TYPE"
to call up the screen shown at left.
Highlighted is the current setting.
[1] Ymodem:
Selects
Ymodem
for file transfer in System
Mode or for the execution of XFILE statement in
BHT-BASIC.
[2] BHT Protocol:
Selects the
BHT-protocol
for file transfer in
System Mode
or for the execution of XFILE
statement in BHT-BASIC.
[3] BHT-Ir Protocol:
Selects the
BHT-Ir protocol
for file transfer in
System Mode
or for the execution of XFILE
statement in BHT-BASIC.
To use BHT-BASIC4.0 Transfer Utility, select Ymodem or BHT-Ir
protocol.
Select a desired item by using the numerical keys or
F5
and
F6
keys,
and then press the
ENT
key.
To return to the SET COMMUNICATION menu, press the
C
key.
On the PROTOCOL TYPE screen, select "1: Ymodem" to call up the
screen shown at left.
[1] CR/LF:
Specifies line delimiters.
[2] CR/LF PROPERTY:
Specifies the treatment of line delimiters in records
when data files are downloaded.
To treat line delimiters in records as separators,
select Control code; to treat them as data, select
Data.
[3] BHT ID:
Specifies whether or not to add the BHT ID number
to packets in
YMODEM transfer.
Usually select None. To add the BHT ID number in
a transfer tool, select Add. (
This setting is not
supported. Changing this setting produces nothing.)
[4] INTERVAL:
Specifies the retry interval within the range from 1
through 255 in units of 100 ms.
Select a desired item by using the numerical keys or
F5
and
F6
keys.
Then select a desired setting by using the
F7
and
F8
keys.
65