If the BHT is used near other radio devices such
as a personal radio station or an amateur radio
station, it may not be able to read/write RF tags.
Do not use the BHT used near other radio
devices such as a personal radio station or
an amateur radio station.
If the distance from an RF tag is too close or too
far, the BHT may not be able to read/write it.
The writable distance may be shorter than the
readable distance.
The readable and writable distances vary
according to the RF tag type. Slowly move
the BHT toward and away from an RF tag to
find the readable and writable distances.
Distance from an
RF tag
Scanning codes
Follow the procedure below to scan codes.
1
Turn the BHT power ON.
Power key
2
Select code scanning test of BhtShell from
desktop menu.
Illumination light
Press the trigger key.
The BHT emits an illumination LED.
3
Hold the BHT close to the code to align the
illumination LED.
Blue LED
When the BHT has read the code
successfully, the indicator LED will
illuminate in blue.
Codes can be read also by pressing the
Scan key.
Point
The code scanning method may differ
depending on the application. Perform
scanning in accordance with the
instructions provided in the application
User’s Manual.
