Important advice for installation / configuration of your GATEWAY 500
for Porsche with MOST bus
Please read these advices first – before installation!
1. Configuration of the DIP switches on the GATEWAY 500 interfaces
Before shipping, we configured your GATEWAY 500 to „Porsche“ – mode, depending on the car radio /
navigation system you choose with your order.
Please double check the GATEWAY 500 interface again before installation, whether the DIP switches are
in the correct position.
navigation system PCM2, PCM2.1, PCM2 DVD
car radio: CDR23, CDR24
DIP-switch 2 and 3 are in the upper „ON“ position
DIP-switch 2 and 3 are in the lower „OFF“
position
DIP-switch 4 is in the upper „ON“ position
DIP-switch 1, 2 and 3 are in the lower „OFF“
position
pic. 1
2. Installation of GATEWAY 500 in front of PCM / CD changer
The
GATEWAY 500
interface shall be integrated into the optical MOST ring of Porsche
Cayenne
in front
of the
PCM.
In all other compatible Porsche models with optical MOST BUS (Boxster, Cayman and 911), the
GATEWAY 500
interface must be integrated into the optical ring after the
PCM / CDR
unit and in front of
the
CD changer
, like shown in pic. 1, page 2 in the English installation guide (DENSION
The pictures
4b and 5 on page 3
might raise the impression, the GATEWAY 500 interface is meant to be
installed into the optical line-out cable after the CD-changer. This is not valid for Porsche systems; please
ignore picture 4b and 5 on p. 3 regarding the optical ring direction.
3. Configuration of the CD text display – GATEWAY 500
Amendatory explanation to the DENSION user manual (2. Configuration)
The GATEWAY 500 enables display of song and artist information (CD text) on the screen of the
navigation systems PCM. The CDR radio devices are not text capable.
In order to apply the full potential of the screening possibilities you have to proceed the following
configurations after installation of the GATEWAY 500.
powered by
maxxcount.de
