9
3-4. Operation Setting
Step 1.
Make sure the AC power voltage switch is setting correctly.
Step 2.
Make sure nothing is connecting to charging clips.
Step 3.
Set 115 when input 90-120Vac; set 230 when input 180-240Vac.
115Vac
Input voltage
230Vac
Setting
WARNING
The AC power voltage setting must to be set as same as the input voltage.
Never input 230Vac under the setting of 115Vac.
Step 4.
Press I on the AC power switch to turn charger on.
Step 5.
All LED indicators light for 2 seconds. Afterward, red LED flashes indicate the charging clips
is disconnecting to battery. The rectangle LED indicates the set charging voltage.
Step 6.
Set charging voltage by pressing the switch key around 0.5 seconds. The setting order is
12V
→
24V
→
36V
→
48V
→
12V…. The number of rectangle LED lights reflects to the
charging voltage user chose.
12V
Setting
24V
LED status
36V
Setting
48V
LED status
NOTE
The charging voltage must to be set as same as the battery voltage.
Step 6.
Press O on the AC power switch to turn charge off. The setting is done.
