Playing music from the AUX input
1
Connect an audio device with a 3.5 mm stereo audio
output to the AUX input on your speaker using the
included 3.5 mm stereo audio cable.
When a stereo audio cable is connected to AUX IN, the source
automatically switches to Inputs.
NOTE
When there is a cable connected to AUX IN, select “Inputs” from the Music
tab.
2
Initiate playback on the audio device.
The sound from the audio device can be played directly on the selected speaker or
digitized and sent over your network to other speakers.
NOTE
The analog output signals from some sources can be fairly strong. If the input level of
the source device is turned up high, it could overload the inputs of the HEOS device.
This is unlikely to cause damage, but can cause distorted sound. Initially, set the
volume of the source to a medium – low level, then turn it up as needed. If you hear
distortion, turn down the device's volume control.
.
Audio signal
Contents
Setup
Use
Troubleshooting
Status LED
Appendix
20