Denon Envaya Mini DSB-100, Owner'S Manual

Page: 24 / 35

o
Cannot pair a Bluetooth device with the speaker
Symptom Cause / Solution Page
Cannot pair a Bluetooth
device with the speaker.
0
Power On the speaker then press and hold the
1
/
3
button for 3 seconds until you hear a 3 tone beep.
Make sure your mobile device has Bluetooth On and select “Envaya Mini” from the list of Bluetooth
devices.
－
0
The Bluetooth connection is experiencing wireless interference. Move the speaker away from appliances
such as microwave ovens and other wireless devices.
－
0
The Bluetooth device is out of range. Bring the Bluetooth device closer to the speaker.
－
0
The Bluetooth device is malfunctioning. Power cycle the device and try again.
－
0
The Bluetooth device is malfunctioning. Power cycle the device, remove the pairing information (Forget
this Device on iOS and Unpair on Android) and re-pair the speaker to the device.
－
0
Bluetooth is off on the device. Make sure Bluetooth is set to ON on your device.
－
0
If the stereo mini plug cable is connected, remove the cable.
－
o
Cannot pair or connect an NFC device
Symptom Cause / Solution Page
Cannot pair or connect an
NFC device.
0
Bluetooth is off on the device. Make sure Bluetooth is set to ON on your device.
－
0
NFC is off on the device. Check that NFC is set to ON on your device.
－
0
Check the position of the NFC antenna on the Bluetooth device and touch it to the
Q
mark on Envaya
Mini. Make sure to touch it until the Bluetooth device responds.
14
Contents Preparation Connections Operation Troubleshooting Appendix
24
Index