16
DVD-2500BTCI
HOW TO INITIALIZE THE BLU-RAY DISC PLAYER
To put the program back at the factory-default,
initialize the BD player as the following procedure.
1. Turn the power on by pressing the [POWER]
button and the tray will close.
2. Press [1], [2], [3], [4], and [DISPLAY] buttons on
the remote control unit in that order.
Fig. a appears on the screen.
3. Press [STOP] button on the remote control unit.
Fig. b appears on the screen and Fig. c appears
on the VFD.
4. To exit this mode, press [POWER OFF] button.
Fig. a
"*******" differ depending on the models.
MODEL : *******
Version : *.***
Region : * / *
EXIT: POWER
EEPROM CLEAR : STOP
Fig. b
"*******" differ depending on the models.
MODEL : *******
Version : *.***
Region : * / *
EXIT: POWER
EEPROM CLEAR : STOP
EEPROM CLEAR : OK
Fig. c
Summary of Contents for DVD-2500BTCi - Blu-Ray Disc Player
