Others
24
¢
Receiver section
Rated output:
2-channel driving (CD
/
SP OUT)
35 W + 35 W (4
Ω
/ohms, DIN, 1 kHz, T.H.D. 0.7%)
Output terminals:
4 to 16
Ω
/ohms
T.H.D.:
0.05% (Rated output: –3 dB), 8
Ω
/ohms, 1kHz
Equalizer amplifier output
(REC OUT):
Rated output
150 mV
Input sensitivity / input impedance:
PHONO (MM) :
2.5 mV/47 k
Ω
/kohms
CD/HDD, DOCK/AUX, TAPE, MD :
300 mV/30 k
Ω
/kohms
RIAA deviation:
PHONO :
20 Hz ~ 20 kHz±0.5 dB (MM)
Audio input/output terminals:
PHONO input terminal, CD/HDD input terminal, DOCK/AUX input terminal,
PORTABLE input terminal, TAPE input/output terminal
MONO output terminal, HEADPHONE output terminal, MD input/output terminal
DIGITAL OPT.OUT output terminal
Reception frequency range:
FM : 87.5 MHz ~ 108.0 MHz AM : 522 kHz ~ 1611 kHz
DAB : BAND3 170 MHz ~ 240 MHz
Reception sensitivity:
FM : 1.5 µV/75
Ω
/ohms
AM : 20 µV
DAB : –97dBm
FM stereo isolation:
35 dB (1 kHz)
FM S/N raito:
Monaural: 74 dB
Stereo: 70 dB
FM harmonic distortion:
Monaural: 0.3 %
Stereo: 0.4 %
¢
Clock/timer section
Clock type:
Power line frequency synchronized method (± 30 seconds per month)
Timer:
Everyday timer (1 set)
Once timer (1 set)
Sleep timer (Max. 90 minutes)
¢
Properties
SN Ratio:
PHONO (MM) :
80 dB (With input terminals
short-circuited, 5 mV input signal)
(A network)
CD/HDD, DOCK/AUX, TAPE, MD :
90 dB (input terminals short-circuited)
Tone control (bass):
BASS :
100 Hz ± 8 dB
TREBLE :
10 kHz ± 8 dB
SDB :
100 Hz + 10 dB
Frequency response:
5 Hz ~ 80 kHz (+0.5 dB, –3 dB) (INPUT: CD, SOURCE DIRECT: ON)
¢
General
Power outlets:
1 switched outlets, total capacity 100W (0.43 A)
Power Supply:
AC 230 V, 50 Hz
Power Consumption:
85 W
0.1 W Max (Standby) (In the low-power standby mode)
Dimensions:
250 (W) x 74 (H) x 250 (D) mm (Not including protruding parts)
250 (W) x 82 (H) x 285 (D) mm (Including protruding parts)
Mass:
4.0 kg
¢
Remote control unit (RC-1034)
Remote control method:
IR pulse method
Power supply:
Two R03/AAA batteries
Maximum external
dimensions:
49 (W) x 220 (H) x 25 (D) mm
Mass:
120 g (Including batteries)
* For purposes of improvement, specifications and design are subject to change without notice.
Specifications
