Denon DNP-730AE, Owner'S Manual

Page: 80 / 108

o
USB memory devices cannot be played back
Symptom Cause / Solution Page
“No Connection” is
displayed.
0
The set cannot recognize a USB memory device. Disconnect and reconnect the USB memory device. 19
0
USB memory devices of a mass storage class or those compatible with MTP are supported.
－
0
This unit does not support a connection through a USB hub. Connect the USB memory device directly to
the USB port.
－
0
The USB memory device must be formatted to FAT16 or FAT32.
－
0
Not all USB memory devices are guaranteed to work. Some USB memory devices are not recognized.
When using a type of portable hard disc drive compatible with the USB connection that requires power
from an AC adapter, use the AC adapter that came with the drive.
－
Files on the USB memory
device are not displayed.
0
Files of a type not supported by this unit are not displayed. 42
0
This unit can display a file structure with up to 8 levels and up to 5000 subfolders and files in total. Modify
the folder structure of the USB memory device.
－
0
When multiple partitions exist on the USB memory device, only files on the first partition are displayed.
－
Files on a USB memory
device cannot be played.
0
Files are created in a format that is not supported by this unit. Check the formats supported by this unit. 42
0
You are attempting to play a file that is copyright protected. Files that are copyright protected cannot be
played on this unit.
－
o
File names on the iPod/USB memory device are not displayed properly
Symptom Cause / Solution Page
The file names are not
displayed properly (“…”,
etc.).
0
Characters that cannot be displayed are used. This is not a malfunction. On this unit, characters that
cannot be displayed are replaced with a “.” (period).
－
Contents Connections Playback Settings Tips Appendix
80
Front panel Rear panel
Remote control
unit
Index