25
Getting started
Connection
Playback
Troubleshooting
Specifications
Index
Others
Preset
Preset function
Preset menu map
Setting items
Description
Auto Cue
Sets the detection level of the sound start point when ignoring the soundless part at
the head of a track at playback.
(A.CUE ON* / A.CUE OFF)
Brake Time
Setting the track end time
(STEP 1 / STEP 2* / STEP 3 / STEP 4)
Auto Close
Time for automatically closing disc holder.
(Close OFF / Close 10s / Close 30s* / Close1min)
Jump Time
Select the jump time of QuickJump.
(Jump10sec* / Jump20sec / Jump30sec / Jump1min)
P. Range
Select the playing pitch range when the power is turned on.
(4% Range / 10% Range* / 16% Range / 24% Range)
EOM Time
Sets the notification for the time remaining until the end of the track being played back.
(EOM OFF / EOM 10 sec* / EOM 15 sec / EOM 20 sec / EOM 30sec / EOM 60 sec /
EOM 90 sec)
Fader Mode
Switches the operation for fader start for the mixer connected to this unit.
Select 1-line (TS) type cable (Play and Pause).
Select 2-line (TRS) type cable (CUE and Play)
(Play / CUE* / Play Pause)
Power Play
Switches power on playback on or off.
Playback starts when the power is turned on if a disc is loaded.
(P. Play ON / P. Play OFF*)
Pitch
Select the pitch mode when the power is turned on.
(Pitch ON* / Key. AdjON (KEY ADJUST ON) / Pitch OFF)
Play Mode
Select the play mode when the power is turned on.
(Single / Cont. / Play Lock*)
Time Mode
Select the time mode when the power is turned on.
(Elapsed* / Remain)
Bpm Disp
Select the BPM display
(Disp ON* / Disp OFF)
Relay Mode
Switches relay playback on or off.
(Relay ON / Relay OFF*)
Relay Time
Select the crossover time the currently playing track when the opposite drive start to
play with the Relay Play function.
(Relay Osec* / Relay 1sec / Relay 2sec / Relay 3sec)
Setting items
Description
MemoClear
Memo Clear (MEMO ALL CLEAR)
NOTE: This PRESET item can be only performed in CD1 (left side) of the remote
controller.
Clear all MEMO data in the non-volatile memory.
q
To clear all MEMO data, press the
SEL.
down.
“Clear OK?” flashes on the character display.
w
Press the
TRACK SEL.
down again and select “OK” to execute clearing all MEMO
data.
“Memo Clear” is displayed on the character display while clearing.
e
Once clearing is completed, “Complete!” is displayed.
Version No
The DN-D4500MK2’s software version is displayed.
(SYSTEM/DSP/SER/RC)
Preset Int
Set all the preset data back to the factory defaults.
q
To clear the PRESET data, press the
TRACK SEL.
down.
“Initial OK?” flashes on the character display.
w
Press the
SEL.
down. again and select “OK” to start clear the preset data.
“Preset Int” is displayed on the character display while data clearing.
e
Once clearing is completed,
“Complete!” is displayed.
The “*” mark next to the data indicates the default value.
How to adjust the various Preset settings
1
Hold down •
BACK –PRESET
.
“PresetMode” is displayed.
2
Turn
SEL
. to select the setting item.
Press
SEL.
to enter the selected item.
3
Press •
BACK –PRESET
.
“Now Saving” is displayed.
Configuration is complete.
