6
Menu Operation
To access the main Menu
, press
Menu
.
To move through the options in the Display
, use the
Navigation Buttons
or the
Jog Dial
.
•
Press
Right
to move forward in the menus.
•
Press
Left
to move backward in the menus.
•
Press
Up
or
Down
or use the
Jog Dial
to change selection.
To confirm a selection,
press the
Jog Dial
or the
Enter
button.
You can also use the
Remote Control
to navigate the
Display
and make selections.
See the following sections for information on each Menu item:
Configuration
Select the Configuration icon to access the following sub-menu options.
Mode
Select this option to choose
Internet Radio
or
Clock Radio
modes. When Internet Radio
mode is selected, the
Display
will default to the currently selected media type when the
Mode
button is pressed. When Clock Radio mode is selected, the
Display
will default to a standby
screen featuring the time, date, and weather (if added) when the
Mode
button is pressed.
Manage my mediaU
Select this option to
Enable
or
Disable
the mediaU management system, which allows you to
save and organize favorite stations and share them between devices. See
for more information.
Note:
To use the mediaU management system, an account is required. Visit
for
more information.
Network
Select this option to configure your Network settings.
•
Wired Network Configuration:
Select this to
Enable
or
Disable
a wired network
connection. When enabled, you will automatically join the connected network. Make sure
the
RJ45 Port
is connected to a network switch or router before doing so.
•
Wireless Network Configuration:
Select this to
Enable
or
Disable
a wireless network
connection. When enabled, you can select which wireless network you want to join. If the
network is password protected, you will be prompted to enter it using the
Jog Dial
and
Navigation Buttons
.
•
Wireless Network (WPS PBC):
Select this to
Enable
or
Disable
a connection to a Wi-Fi
Protected Setup (Push-button configuration).
•
Manual Configuration:
o
Wired:
Choose
DHCP On
or
DHCP Off
.
o
Wireless:
Choose
DHCP
(
On
or
Off
),
Enter SSID
, or
Manage
.
•
Check Network when Power On:
Select this to
Enable
or
Disable
automatic network
reconnection when powered on. When enabled, DN-300UI will connect to the last used
network.
