Denon AVR-X6500H Owner'S Manual Download Page 193

Page: 193 / 334

HDMI Setup

Make settings for HDMI Audio Out, HDMI Pass Through and HDMI

Control settings.

NOTE

When “HDMI Pass Through” and “HDMI Control” is set to “On”, it consumes more

standby power. (“ HDMI Pass Through ” (

p. 193), “ HDMI

Control ” (

p. 195))

If you are not using this unit for an extended period, it is recommended that you

unplug the power cord from the power outlet.

HDMI Audio Out

Select HDMI audio output device.

AVR

(Default):

Play back through speakers connected to

the unit.

TV:

Play back through TV connected to the

unit.

When the HDMI Control function is activated, priority is given to the TV audio

setting. (

p. 152)

When the power of this unit is on and “HDMI Audio Out” is set to “TV”, audio is

output as 2-channel from the HDMI OUT connector.

HDMI Pass Through

Selects how this unit will transmit HDMI signals to the HDMI output in

standby power mode.

(Default):

Transmits the selected HDMI input

through this unit’s HDMI output when this

unit is in standby power mode.

Off:

No HDMI signals are transmitted through

this unit’s HDMI output in standby power

mode.

193

Summary of Contents for AVR-X6500H














































































































































































































































































































































Search results

Summary of Contents for AVR-X6500H

Reviews:

Related manuals for AVR-X6500H

Brands by name

Popular brands

Denon AVR-X6500H, Owner'S Manual

Search results

Summary of Contents for AVR-X6500H

Reviews:

Related manuals for AVR-X6500H

Brands by name

Popular brands