Denon AVR-X6500H Owner'S Manual Download Page 189

Page: 189 / 334

Graphic EQ

Uses the graphic equalizer to adjust the tone of each speaker.

Speakers for which “Graphic EQ” can be set differ according to the sound mode.

This can be set when “MultEQ

XT32” setting is “Off”. (

p. 186)

This cannot be set when the sound mode is set to “Direct” or “Pure Direct”.

If you are using headphones, you can set the equalizer for headphones.

(

p. 189)

Graphic EQ / Headphone EQ

Set whether to use the graphic equalizer or not.

On:

Use the graphic equalizer.

Off

(Default):

Do not use the graphic equalizer.

“Headphone EQ” is set in the menu when headphones are used.

Speaker Selection

Select whether to adjust tones for individual speakers or for all

speakers.

All:

Adjust all speaker tones together.

Left/Right

(Default):

Adjust the left and right speaker tones

together.

Each:

Adjust the tone for each speaker.

Adjust EQ

Adjust tonal balance for each frequency band.

1. Select the speaker.

2. Select the adjustment frequency band.

63 Hz

125 Hz

250 Hz

500 Hz

1 kHz

2 kHz

4 kHz

8 kHz

16 kHz

3. Adjust the level.

–20.0 dB – +6.0 dB (Default: 0.0 dB)

Front Dolby, Surround Dolby and Back Dolby speakers can only be set when

63 Hz/125 Hz/250 Hz/500 Hz/1 kHz.

189

Summary of Contents for AVR-X6500H














































































































































































































































































































































Search results

Summary of Contents for AVR-X6500H

Reviews:

Related manuals for AVR-X6500H

Brands by name

Popular brands

Denon AVR-X6500H, Owner'S Manual

Search results

Summary of Contents for AVR-X6500H

Reviews:

Related manuals for AVR-X6500H

Brands by name

Popular brands