background image

o

Video

ISF
ISF (Imaging Science Foundation) is an organization that certifies video

technicians who are then qualified to carry out calibration and adjustment

to match the installation conditions. It also sets quality standards for the

optimization of device video performance.

Progressive (sequential scanning)
This is a scanning system of the video signal that displays 1 frame of video

as one image. Compared to the interlace system, this system provides

images with less flickering and jagged edges.

o

Network

AirPlay
AirPlay sends (plays) contents recorded in iTunes or on an iPhone/iPod

touch/iPad to a compatible device via the network.

WEP Key (network key)
This is key information used for encrypting data when conducting data

transfer. On this unit, the same WEP key is used for data encryption and

decryption, so the same WEP key must be set on both devices in order for

communications to be established between them.

Wi-Fi

®

Wi-Fi Certification assures tested and proven interoperability by the Wi-Fi

Alliance, a group certifying interoperability among wireless LAN devices.

WPA (Wi-Fi Protected Access)
This is a security standard established by the Wi-Fi Alliance. In addition to

the conventional SSID (network name) and WEP key (network key), it also

uses a user identification function and encrypting protocol for stronger

security.

WPA2 (Wi-Fi Protected Access 2)
This is a new version of the WPA established by the Wi-Fi Alliance,

compatible with more secure AES encryption.

Contents

Connections

Playback

Settings

Tips

Appendix

311

Front panel

Display

Rear panel

Remote

Index

Summary of Contents for AVR-X6400H






































































































































































































































































































































Reviews: