Denon AVR-X540BT Owner'S Manual Download Page 49

Page: 49 / 138

Operations accessible through the option

menu

“Tuning in to stations and presetting them automatically (Auto

Preset)” (

p. 52)

“Skipping preset broadcast stations (Preset Skip)” (

p. 54)

“Adjusting the tone (Tone)” (

p. 57)

“Displaying your desired video during audio playback (Video

Select)” (

p. 59)

RDS search

RDS (works only on the FM band) is a broadcasting service which allows

a station to send additional information along with the regular radio

program signal.
Use this function to automatically tune to FM stations that provide the RDS

service.
Note that the RDS function only works when receiving RDS compatible

stations.

Press FM to switch the input source to “Tuner”.

Press OPTION.

The option menu screen is displayed.

Use

to select “RDS Search”, then press ENTER.

Press ENTER.

The search for RDS stations begins automatically.

Summary of Contents for AVR-X540BT










































































































































Search results

Summary of Contents for AVR-X540BT

Reviews:

Brands by name

Popular brands

Denon AVR-X540BT, Owner'S Manual

Search results

Summary of Contents for AVR-X540BT

Reviews:

Brands by name

Popular brands