Denon AVR-X500, Owner'S Manual

Page: 32 / 66

29
n Adjusting the volume of the speakers
( v
page 29
)
n Sleep timer function ( v page 30 )
n Quick select function
(
v
page 30 )
n Various memory functions
(
v
page 30 )
Playback (Basic operation) ( v
page 15
)
Selecting a listening mode (Surround mode)
( v
page 21
)
Playback (Advanced operation)
Adjusting the volume of the speakers
You can adjust the channel level either according to the playback
sources or to suit your taste, as described below.
Adjusting the volume of the different
speakers
1
Press
CH LEVEL
.
Levels
Front Rear
Front L
Center
Front R
Subwoofer
Surround R
Surround L
Fader
0.0dB
0.0dB
0.0dB
0.0dB
0.0dB
0.0dB
2
Use
ui
to select the speaker.
The speaker that can be set switches each time one of the
buttons is pressed.
3
Use
o p
to adjust the volume.
• In the case of a subwoofer, pressing o when it is at “–12 dB” will
change the setting to “Off”.
• If you do not press any button for approximately 5 seconds, the
menu screen light turns off.
• When a headphone jack is inserted, the headphone channel level
can be adjusted.
Adjusting the volume of groups of speakers
(Fader function)
This function lets you adjust (fade) the sound all at once from the front
(front speaker / center speaker) or rear (surround speaker).
1
Press
CH LEVEL
.
Levels
Front Rear
Front L
Center
Front R
Subwoofer
Surround R
Surround L
Fader
0.0dB
0.0dB
0.0dB
0.0dB
0.0dB
0.0dB
2
Press
i
to select “Fader”, then select the item to be
adjusting using
o p
.
Levels
Front Rear
Front L
Center
Front R
Subwoofer
Surround R
Surround L
Fader
0.0dB
0.0dB
0.0dB
0.0dB
0.0dB
0.0dB
3
Use
o p
to adjust the volume of the speakers.
( o : front, p : rear)
• If you do not press any button for approximately 5 seconds, the
menu screen light turns off.
• The fader function does not affect the subwoofer.
• The fader can be adjusted until the volume of the speaker is adjusted
to the lowest value of –12 dB.
Basic instr
uctions
A
dv
anced instr
uctions
Inf
or
mation
A
dv
anced instr
uctions
DVD