Denon AVR-X1500H Owner'S Manual Download Page 205

Page: 205 / 279

Allow Update

Enable or disable updates and upgrades for this unit.

(Default):

Enables this unit to receive updates and

upgrades.

Off:

Prevents this unit from receiving update

and upgrade.

This setting causes Incompatibilities between this unit and HEOS App.

Upgrade Notice

When the latest Upgrade firmware is available, a notification message

is displayed on the TV screen at power on.
The notification message is displayed for about 40 seconds when the

power is turned on.

(Default):

Display upgrade message.

Off:

Do not display upgrade message.

This menu cannot be selected when “Allow Update” is set to “Off”.

205

Summary of Contents for AVR-X1500H























































































































































































































































































Search results

Summary of Contents for AVR-X1500H

Reviews:

Brands by name

Popular brands

Denon AVR-X1500H, Owner'S Manual

Search results

Summary of Contents for AVR-X1500H

Reviews:

Brands by name

Popular brands