The First Name
In Digital Audio
4
AVR-3600
Power Amplifier Section
Same quality amplifier for all 5-channel
Rated output
* THD figures are power amp stage values.
Front
140 W + 140 W
(8 ohms, 20Hz - 20 kHz, THD 0.05%)
Center
140 W
(8 ohms, 20Hz - 20 kHz, THD 0.05%)
Surround
140 W + 140 W
(8 ohms, 20Hz - 20 kHz, THD 0.05%)
Dynamic Power
190 W x 2 ch (8 ohms)
310 W x 2 ch (4 ohms)
390 W x 2 ch (2 ohms)
Preamplifier Section
Input sensitivity/ Impedance
PHONO (MM) : 2.5 mV/ 47 kohms
CD, DVD, VDP, TV/ DBS, VCR-1, VCR-2, V.AUX,
MD/ TAPE 1, TAPE 2, 8-ch EXT. : 200 mV/ 47 kohms
Output level/Load Impedance
FRONT L/R, CENTER, SURROUND L/R, EFFECT L/R,
SUB WOOFER : 1.2 V/ 10 kohms
VCR-1, VCR-2, MD/ TAPE 1, TAPE 2,
MULTI SOURCE : 150mV/ 47 kohms
Digital Input Optical
VDP, VCR-1, VCR-2, V.AUX, TAPE1(Initial)
Coaxial
CD, DVD, TV/ DBS (Initial)
RF
VDP (Fixed)
Digital Output
REC OUT : TAPE-1 (Initial)
RIAA deviation
±1 dB (20 Hz - 20 kHz)
Signal-to-noise ratio (A-weighting)
105 dB (DIRECT)
Tone control
Treble : ± 10 dB at 10 kHz
Bass : ± 10 dB at 100 Hz
Video Section
Input Terminal Composite
DVD, VDP, TV/ DBS, V.AUX, VCR-1, VCR-2 :
1 Vp-p / 75 ohms
S-Video
DVD, VDP, TV/ DBS, V.AUX, VCR-1, VCR-2 :
1 Vp-p / 75 ohms
Component Video
DVD, TV
Output Terminal Composite
VCR-1, VCR-2, MONITOR-1, MONITOR-2 :
1 Vp-p / 75 ohms
S-Video
VCR-1, VCR-2, MONITOR-1, MONITOR-2 : 1 Vp-p / 75 ohms
Component Video
MONITOR (5 - 20 MHz, +0, -3 dB)
FM Section
Tuning frequency range
87.5 - 107.9 MHz
Usable sensitivity
1.0 µV (11.2 dBf)
S/N 50 dB sensitivity (µV at 75 ohms)
Mono : 1.6 µV (15.3 dBf)
Stereo : 23 µV (38.5 dBf)
Signal-to-noise ratio (A-weighting)
Mono : 80 dB, Stereo: 75 dB
Total harmonic distortion
Mono : 0.15%, Stereo: 0.3%
AM Section
Tuning frequency range
520 - 1710 kHz
Usable sensitivity
18 µV
Signal-to-noise ratio
50 dB
General
Power supply, Power consumption
AC 120 V, 60 Hz, 11 A
Dimensions, Weight
434 (W) x 181 (H) x 494 (D) mm, 21.5 kg, 47.4 lbs.
17.1”(W) x 7.1” (H) x 19.4” (D)
Specifications
AVR-3600dts
