6
Important information
Converting input video signals for output (Video conversion function)
This unit is equipped with three types of video input connectors (HDMI, Component video and video) and two types of video output connectors
(HDMI and video).
This function automatically converts various formats of video signals input to this unit into the formats used to output the video signals from
this unit to a monitor.
G
Flow of video signals for MAIN ZONE
H
HDMI connector
HDMI signal
HDMI signal
Component video
signal
Video signal
Video signal
Video connector
HDMI-compatible TV
HDMI-incompatible
TV
HDMI connector
Component video
connectors
Component video
connectors
Video connector
Video connector
HDMI connector
HDMI connector
Video connector
Video device
This unit
Output
Input
(IN)
Output
(MONITOR OUT)
Input
For example, if you connect this unit to an HDMI-compatible TV with a single HDMI cable, this unit automatically converts input signals other
than HDMI video signals to HDMI signals to output from the HDMI connector to the TV. This unit outputs only one type of video signals, so
video signals output from this unit to the TV remain unchanged even if you switch to a device that outputs another type of video signals for
playback. Therefore, you do not need to switch the video input on the TV. Furthermore, this unit converts the input analog video signals such as
video and component video signals to high resolution digital HDMI video signals for output, improving the quality of the video.
If your TV does not support HDMI connections, connect this unit to TV with analog video connectors. This unit can not convert HDMI input
signals to analog video signals, so when inputting from an HDMI device, use component video or video input connectors.
•
If you do not want this unit to convert video signals automatically,
use the following setting item to disable this function.
“Video Conversion”
(
•
If you want to change the resolution of video signals output to
the TV, use the following setting item to do so.
“Resolution”
(
Make Settings as Necessary
•
The video conversion function supports the NTSC, PAL, SECAM,
NTSC 4.43, PAL-N, PAL-M and PAL-60 formats.
•
Resolutions of HDMI-compatible TVs can be checked at “Video” –
“Monitor” (
).
NOTE
•
The menu screen is only displayed on TV connected to this unit
via HDMI. If your TV is connected to this unit via other video
output connectors, perform menu operations while seeing the
display on this unit.
•
HDMI signals are digital. HDMI signals cannot be converted into
analog signals.
•
When a non-standard video signal from a game machine or some
other source is input, the video conversion function might not
operate.
Basic v
ersion
A
dv
anced v
ersion
Inf
or
mation
Basic v
ersion
