■
Fully Discrete, Equal Power Seven Amplifier Channels
Front .................. 150 W + 150 W
(6 ohms, 1 kHz, 0.7 % THD)
Center ................ 150 W
(6 ohms, 1 kHz, 0.7 % THD)
Surround ............ 150 W + 150 W
(6 ohms, 1 kHz, 0.7 % THD)
Surround back ... 150 W + 150 W
(6 ohms, 1 kHz, 0.7 % THD)
The AVR-1082 features an equal power 7-channel amplifier section,
with identical amplifier design on all 7 channels, with high current discrete
output devices on all channels. Each of the 7 amplifier channels is
rated at 150 watts, into 6 ohms.
■
Hefty Power Transformer for Stable Supply of Power
A huge power transformer has been connected in the power section
where it is combined with a rectifier diode and a large block capacitor
to ensure a large, stable supply of electrical current. Accordingly, the
AVR-1082 boasts high output power of 150 W for each of the 7 channels.
■
High Power Custom Transistor
When temperatures rise or fall inside the unit, bias current values supplied
to the power transistor tend to fluctuate, causing sound quality to deteriorate.
The high power custom transistor used in the AVR-1082 ensures that
the bias current is constantly uniform so that the sound you hear is of
consistently stable, high quality.
■
DDSC-Digital, for High-quality Sound Reproduction
Featuring the Analog Devices SHARC 32-bit floating point DSP processor,
DENON’s DDSC-D circuitry faithfully recreates all the nuances of the
original performance. Compared to ordinary 24-bit fixed point DSP
processors, the Analog Devices SHARC 32-bit floating point DSP processor
features greatly increased computational dynamic range for superior
reproduction of stereo and multi-channel digital program sources.
■
Featuring DTS-ES Discrete 6.1 Decoding
The AVR-1082 is equipped with the DTS-ES (true discrete) 6.1 decoder,
developed by DTS to provide dramatically improved surround sound
panoramic reproduction and superior surround sound localization.
■
Supports DTS-ES Matrix 6.1 Decoding
■
Supports DTS NEO:6 Surround Decoding
■
Featuring Dolby Pro Logic II Decoding
Enjoy 2-channel stereo recordings in stunning 5.1-channel surround playback.
The Dolby Pro Logic II decoder reproduces dynamic 5.1-channel surround
sound not only from normal 5.1-channel DVD but from 2-channel sources
such as videos and CDs, too. Dolby Pro Logic II uses matrix decoding
technology that has been dramatically improved over Pro Logic. With Pro
Logic II, for instance, the Surround (Rear) channels are in stereo (only
mono with Pro Logic) and playback covers the full frequency range (only
up to 7 kHz with Pro Logic). These improvements let you enjoy a wide
variety of 2-channel sources with the exciting effects of 5.1-channel surround
sound. In Dolby Pro Logic II, there is a Movie mode that creates a sound
space suitable for movies, a Music mode that does the same for music,
and a Pro Logic emulation feature that reproduces sound effects in the
way that conventional Pro Logic does.
■
Dolby Digital Decoding
■
96 kHz, 24-bit Audio D/A Converters
AVR-1082
A/V Surround Receiver
N E W M O D E L I N F O R M A T I O N
DTS-ES Discrete 6.1 and Dolby Pro Logic II with 7 Power Amps and Multi-room Flexibility
The AVR-1082 provides two power amps for the Surround Back channels for a total of 7 fully-discrete amps of equal power.
This powerful configuration lets you take maximum advantage of the dynamic performance that today's DTS-ES, Dolby Digital EX,
DVD-Audio, and SACD program sources offer. The Dolby Pro Logic II features lets you hear 2-channel stereo sources in realistic
5.1-channel surround sound. The AVR-1082 includes Multi Zone Output and Power Amp Assign functions that let you output
different sources to more than one room.
