4
1. GENERAL INFORMATION
ENGLISH
(2) Rear panel
ANALOG OUTPUT
L
R
FIXED VARIABLE
RS232C
PARALLEL
IR FLASH
SPDIF
AES/EBU
L
R
LEVEL
LEVEL
BALANCED
DIGITAL OUTPUT
REMOTE
HOT( )
COLD(
GND
x
n
m
.
z
v
b
,
c
z
ANALOG (Balanced) OUTPUT
• These are active balanced outputs using XLR type connections. The CD's audio playback
signals are output from these connectors.
• Pin layout : 1. GND / 2. Hot / 3. Cold
• Applicable connector :
Cannon XLR-3-31 or equivalent.
NOTE :
• Do not short-circuit the hot or cold pin with the common pin.
x
LEVEL Control
• Use these controls to adjust the level of the audio signals from the BALANCED OUT
connectors.
c
ANALOG (Unbalanced) OUTPUT
• These are unbalanced outputs using RCA type jacks.
• VARIABLE
Use the remote control unit or web GUI to adjust the output level.
v
DIGITAL (SPDIF) OUTPUT
• This is a coaxial output using an RCA type jack.
• Signal format : SPDIF(IEC-958 Type
II
)
Only
b
DIGITAL (AES/EBU) OUTPUT
• This is a balanced output using an XLR type jack.
1.Common / 2.Hot / 3.Cold.
• Signal format : SPDIF Only
• Applicable connector: cannon XLR-3-31 or equivalent
NOTE :
• Do not short-circuit the hot or cold pin with the common pin.
n
RS232C connector
Connector for serial control from an external device.
m
PARALLEL connector
Connector for parallel control from an external device.
,
IR FLASH (RC In Control) Jack (1/8” stereo mini jack)
Basic functions can be controlled.
PLAY, PAUSE, CUE,FWD, FF, SKIPBACK, TRACK JUMP-,
TRACK JUMP+, STOP.
.
AC inlet
Connect the included power cord here.
