Denon Professional DN-500R, Serial Command Protocol Manual

Page: 10 / 40

10
Control Commands
(Host
→
DN-500R)
CATEGORY CONTENTS CODE DESCRIPTION
Advanced
Recording
Options
Lower/Raise Input Level @0It XYYY \r
Adjusts the analog input volume level for either
the left or right channel, where
X = L (for the left
channel) or R (for the right channel) and YYY (the
volume adjustment in multiples of 0.1 dB) = -20
– +20
For example, to increase the volume of the left
channel by 1.5 dB, enter this code: @0ltL+15
Set Recording Input
Routing
@0Sp NN \r
Sets the recording input signal to be routed
through the audio outputs, where
NN (the
setting) = 00 (route the recording input signal
through the audio outputs) or 01 (don’t route the
recording input signal through the audio outputs)
Change Rec Level Type @0Rl XX \r
Changes the function of the record level knob on
the front panel, where
XX (the function) = MA
(the record level knob will primarily adjust the
volume level of the left and right channels; while
shift is engaged, the record level knob will adjust
the balance of the left and right channels) or
LR
(the record level knob will primarily adjust the
volume level of the left channel; while shift is
engaged, the record level knob will adjust the
volume level of the right channel)
Change Auto Level
Control (ALC) Type
@0RL XX \r
Determines the function of the Auto Level
Control (ALC) feature, where
XX = MA (turns off
ALC), SE (separate: ALC is applied to the left
and right recording channels individually), or MI
(mixed: ALC is applied equally to the left and
right recording channels)
Track Playback
Play @02353\r Plays the current track
Pause @02348\r Pauses the current track
Stop @02354\r Stops the current tracklist
Hot Start Play @0HP nn \r
Plays the track assigned the entered hot start
number, where
nn (the hot start number) = 01 –
20
Set Playback Range @0Pr XX \r
Selects the tracks to be included in the current
tracklist, where
XX (the setting) = AL (all tracks in
all folders on the current media source) or FD
(only the tracks in the currently selected folder
on the current media source)
Set Playback Mode @0PM XX \r
Sets how DN-500R will cycle through the current
tracklist, where
XX (the setting) = SP (play one
track in the current tracklist and then stop
playback) or
CN (continuously play through the
tracks in the current tracklist)
Turn Repeat On/Off @0RE NN \r
Activates or deactivates the repeat feature,
where
NN = 00 (turn repeat on) or 01 (turn repeat
off)
Turn Random On/Off @0RN nn \r
Activates or deactivates random playback for
the current tracklist, where
nn = 00 (turn random
on) or 01 (turn random off)