5
Rear Panel
1.
Audio Inputs (balanced XLR):
Use XLR cables to connect an
external audio source to these
inputs.
2.
Audio Inputs (unbalanced RCA):
Use RCA cables to connect an external audio source to these
inputs.
3.
Audio Outputs (balanced XLR):
Use XLR cables to connect these outputs to external speakers,
sound system, etc.
4.
Audio Outputs (unbalanced RCA):
Use RCA cables to connect these outputs to external
speakers, sound system, etc.
5.
Power Input:
Use the included power cable to connect this input to a power outlet.
6.
Fuse:
If the fuse blows, replace it with a fuse of the same type. Using a fuse with an incorrect
rating can damage the unit and/or fuse.
Setup
Important:
Connect all cables securely and properly (with stereo cables: left with left, right with
right), and do not bundle them with the power cable.
1.
Use XLR or stereo RCA cables to connect the outputs of your audio sources to the
Inputs
(
balanced
or
unbalanced
) of DN-300R.
2.
Use XLR or stereo RCA cables to connect the
Outputs
(
balanced
or
unbalanced
) to the inputs
of your external receiver, amp, powered monitors, etc.
3.
After completing all the connections, use the included power cable to connect the
Power In
to a
power outlet.
4.
Power on all of your input sources.
5.
Power on DN-300R.
Connection Diagram
Items not listed under
are sold separately.
USB Device
Powered
Monitors
Power
Mixer
SD Card
Headphones
1
2
3
4
5
6
SD
